- Home
- Equipment
Refine by
Entech Instruments Environmental Equipment & Supplies
20 equipment items found
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
The FlowProfessor™ automatically adjusts the flow setting of the CS1200E to obtain the correct flow every time. The sophisticated software even adjusts for estimated field temperatures and sampling site elevation to optimize sampling rates under any environmental condition. Trying to accomplish those calculations manually can be difficult at ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
The internal Silonite® coated sealing spring in a MicroValve™ is stronger than those used in Swagelok® Miniature Quick Connects, to further reduce the potential for leaks even at cold storage temperatures (-15°C). A compression fitting cap is also available, which when used with the MicroValve™ creates a lower combined leak rate than any other currently accepted canister ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
Low Level TO-15 monitoring requires consistent analyte recovery while collecting the maximum sample volume possible to support larger preconcentration volumes or repeat analyses from the same canister. The CS1200E will reliably fill canisters at a constant rate with better demonstrated recovery of TO-15 compounds than any other ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
The TM1200 is Entech’s next generation canister sampling timer that automatically starts and stops the sampling process at specic times. Now you can easily start a 24 hour sample at midnight and stop it at midnight the following night without having to be present. Typically operated with our CS1200Ex canister sampler to time integrate the sampling event for a 24 hour sample, the TM1200 creates an ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
The IH1200 Personal Monitors utilize classical vacuum sampling into MiniCans™ and Bottle-Vacs™ to perform STEL or TWA monitoring for up to 12 hours. Like HDS Personal Monitors, sampling using the IH1200 eliminates the concentration and matrix effects associated with adsorbent-based sampling ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
Preparing HDS™ Personal Monitors for field sampling just became a lot easier with the HDS™ Personal Monitor Prep Station! Simply attach an HDS™ Personal Monitor to the HDS-PS1 Prep Station and use a vacuum pump and cylinder containing Helium and BFT to evacuate, fill, evacuate, and fill the sampler. The personal monitor is now ready to be sent to the field. To clean samplers, simply evacuate, ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
The 7650 Canister Autosampler brings the automated analysis of MiniCans™, Bottle-Vacs™, and other large volume sampling canisters to a whole new level. Building upon the advantages of its predecessors, the 7650 is the first canister autosampler to facilitate the analysis of up to twenty, 1 to 1.4L canisters while maintaining samples in a completely closed and isolated state until required for ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
The TOV-2™ Toxic Organics Valve has been specifically designed to ensure complete recovery of low level TO-14a and TO-15 target compounds. A packless system features an ultra-compact, passivated sample path with no internal weld scars, and a Silonite® coating option for superior inertness and ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
H2S and Methyl Mercaptan recovery has continued to be a analytical challenge when sampled into canisters at PPB to sub-PPB levels. The presence of more than 10–15% relative humidity within a sampling canister has been shown to dramatically reduce reliable storage time of H2S and to a lesser extent Methyl Mercaptan, relative to dry ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
Performing unfiltered sampling into your Silonite® canister can lead to particulate contamination. This will eventually reduce volatile compound recovery, while making it more diffcult to achieve EPA required blank levels. Entech’s Grab Samplers are a great solution to keep your canisters ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
Several carrying cases are available for MiniCan™ and Bottle-Vac™ samplers. Options are based on the number and size of canisters needing to be shipped. Refer to the chart below for canister and valve compatibility. Custom kits can be made using PN 29-20810 which has pre-cut foam inserts to accommodate canisters, samplers, and test ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
We are the only manufacturer to offer the unsurpassed range, quality, and reliability of McDaniel Controls, Inc. gauges along with our exclusive, ¼” compression canister / TOV™ fitting design. The compression fitting connects easily to a dual stem canister, or our new dual port TOV™ without any need for Teflon® ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
Two indoor air HDS™ sampling versions are available from Entech, 1) MiniCan™ and Bottle-Vac Samplers (detailed below) that feature special HDS™ MicroValves that are optimized for standard sampling event durations – the diffusion zone exists inside of the fitting. 2) Controlled helium / air exchange with an external HDS™ diffusion zone fitting (opposite page) that is designed to attach directly to ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
TM1050 enables start/stop canister fill operations with a direct wire connection from up to 500 feet away.TM1050 system includes a Remote Control Unit, Start/Stop Valve Assembly, and a 20' remote cable. Order 39-TM1050S for Silonite® coated Start/Stop Valve Assembly ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
Our new soil gas sampler raises the bar for excellence in soil gas monitoring. A compact flow path design with an optional Silonite® coating ensures low blank levels even after sampling from highly contaminated ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
Entech has engineered a new “twist” in whole air monitoring that eliminates many of the potential sources of error found in other sampling methods. Unlike other monitoring approaches such as tubes and badges, the new HDS™ Monitor enables compounds to remain in the gas phase where chemicals are much less likely to ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
Introducing Entech’s low-cost external HDS™ Samplers that allow any Silonite® Canister or Bottle-Vac™ to be used to perform time integrated sampling both simply and cost-effectively. HDS™ utilizes a simple diffusion zone to control the exchange rate of helium and air, with diameters that are 20–50 times larger than typical critical orifice ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
Entech understands the challenges and solutions for reliable collection of gas-phase compounds at the low to sub-PPB range. We provide powerful “Chromatography Grade” solutions from start to finish, giving you better data with greater ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
MiniCansTM are the next generation of air sampling canisters from Entech. Designed for tool-free operation and advanced robotic analyzers, Silonite® treated MiniCans™ allow the recovery of a wider range of compounds than any other sampling canister – including semi-volatiles up through the full diesel range and C25 ...
Manufactured by:Entech Instruments, Inc. based inSimi Valley, CALIFORNIA (USA)
In the laboratory, analysis by loop injection requires either pressurizing to 3–7psig, or heating to 60–70°C to increase the pressure to purge a loop. Bottle-Vac™ samplers can also be analyzed using the 7200 or 7100A Preconcentrator to withdraw a larger volume for low PPB analysis. Automated analysis can be performed using the 7650, 7410D, or 7032A ...